The industrial Kerr pumps, regardless of the sector they are used in, needs to be well maintained to prevent them from disrepair. It is a waste of money to simply leave these pumps to the mercy of the natural elements since they cost a large amount of money.
Most of the Kerr Pumps can last for a considerably long time. But since they are subject to constant use it is not surprising to see damages occur. Therefore repair is very necessary and you should expect it to be repaired a number of times during the course of many years. Good news is, you can now protect you investment through regular maintenance schedule.
Pump maintenance entails various procedures, most of which are very simple yet very important and should be conducted before and after usage. Depending on how regular or how much they are used, a full service maintenance will sometimes need to be done. A full maintenance service may sometimes need to be done depending on the regularity or the period the pumps are used for. Depending on how long or how regular the pumps are used, a full maintenance service will sometimes be required.
A licensed servicing company should take care of the Inspection, replacement and repairs since there is zero room for errors. This work should be left entirely to experts since the pumps are sometimes used in areas where even an improperly functioning pump may pose a risk.
Calibration. A periodic calibration that ensures the flow rate is in accordance to the specifications is among the things to do in maintenance. Without this, your work can be adversely affected or even lead to accidents. Maintaining a track of the changes in the pumps performance ensures proper functioning of the pump.
Checking fuel system and fluid levels. As the temperature changes, so does the Kerr pumps driven by engines. Therefore since the fluid viscosity will change during cold days, the pump will not likely work. This will also apply in the hot weathers. Therefore, before powering up the pump, necessary adjustments needs to be made. Checkout the fuel gauge and connections for cracks, breaks and leaks. Check kerrpumps.com tolearn more.
The fittings should be checked. The fittings include bolts, nuts, mounting feet as well as relevant hardware without which a pump system can malfunction or even cause accidents. You should also inspect the Belts, fans, wiring and battery cables. Make sure you have the correct attire before attempting to do any repairs. Most servicing companies have personnel armed with the best work-gear, and therefore, inspections can be done without any trouble.
Check out discharge and suction hoses. Since most waste material is removed through the hoses ensure you check them after a long time of use. Some hoses needs to be inspected after every 250 hours of usage while others require a frequent maintenance. Check out https://www.youtube.com/watch?v=VxgJue3Xs9Y for a bit more info about this.